Tag Archives for " Agriculture Tyres "

Agriculture Tyres – How to avoid tyres harming your Queensland harvest

Agriculture Tyres – Tips to keep agricultural tyres in top condition

Agricultural tyres and equipment have a nasty habit of breaking down at the most critical time. And what time could be more significant than during the harvest season in Queensland? You’ve got to be on top of your game at this period of the year. You’ve got the weather to contend with. And when a crop is ready to be harvested, time isn’t going to be on your side.

One of the most critical (and overlooked) pieces of farm equipment are your agricultural tyres. If one blows mid-harvest, it could ruin what promised to be a great crop. Here are my best tips to keep your tyres in peak condition when it matters the most.

1.    Check your agricultural tyres for damage

You may not have given your combine the once-over for some time. Last year’s harvest could have left bulges, cuts and tears on your agricultural tyres that you’ve forgotten about. Not checking your tyres before you put them to work in the field could prove to be an expensive error.

Check the tread and sidewalls for any damage before you start the engine.

2.    Remove agricultural tyre flat spots

When your combine has been inactive for a while, all its weight will have been in one area of the tyres. This can cause flat spots on each of your tyres.

Top agricultural tyre tip: Inflate your tyres to a little above the operating inflation, and move the combine into the sunlight. It will warm your tyres and help return them to their proper shape.

3.    Check tyre pressures

Think about where you combine will be used. Does your land slope? Is there a lot of tarmacs to be travelled?

Consider the terrain and intensity of work, and inflate your tyres to the correct operating pressures.

4.    Check the wheels

Damage to wheels could throw out their alignment and balancing. It could cause you a heap of trouble, with uneven tyre wear leading to a rapid deterioration of the tread.

5.    Don’t neglect your rear tyres

It’s common for farmers to neglect their rear tyres. You should make the same checks on these that you do your front tyres. Make sure that you inflate them to the manufacturer’s recommendations.

6.    Inspect your tyres every day

The sooner you spot tyre damage and make a repair; the more effective the repair will be. It will be cheaper, too.

Make an agricultural tyre inspections part of your daily routine. Check for cuts and bulges. Make sure you check all around the tyre, and inner and outer sidewalls. Check and correct inflation pressures before you go into the field.

7.    Choose the right agricultural tyres

If you need new agricultural tyres, make sure they’re right for the vehicle and the job it’s doing. There is a huge choice of agricultural tyres today. They’re tested for performance, load capacities, and fuel consumption qualities. Michelin’s Ultraflex Technology allows agricultural tyres to be run at lower inflation pressures. It’s been proven to help performance and operator safety and comfort.

Don’t neglect your other vehicles’ agricultural tyres, either. If your trailer is carrying heavy loads, its tyres are just as important as those on your combines and tractors.

The tips above will help you have a great harvest. If you want us to come and check or replace your agricultural tyres or need any tyre advice, contact us (by Skype, telephone, or on our contact form) and get it straight from the experts at our West Brisbane tyre shop. Our technicians are here to help you make the best choice. With extensive experience in the supply and fitting of agricultural tyres, we guarantee you won’t be disappointed.

Keeping your family and fleet safely on the road,

Kevin Wood

>